Professional design engine
DT
DVB Testingtesting@dvbsolutions.test
Student mode · Civil & structural engineeringFree while in testing
Student mode · mechanics, RC beams and bridge decks open

Your assignment question, worked out step by step

Built for civil and structural engineering students. Put in the question and get the answers, then hand-calculation working you can follow line by line, the way a lecturer would set it out.

  • Eurocodes and BS 8110
  • Clause and table for every value
  • Diagrams and bar schedules
  • Answers first, working on request
See a worked example
Worked exampleSample output
Question

A simply supported beam spans 6 m and carries a uniformly distributed load of 10 kN/m with a 20 kN point load at midspan. Find the reactions and the maximum bending moment, and check the deflection against span/360. Take EI = 20 000 kNm².

We read this as20 kN10 kN/mAB6.0 m
Reactions
RA = RB = 40 kN
Max shear
40 kN
Max moment
75 kNm at midspan
Midspan deflection
12.9 mm < 16.7 mm ✓

01 / How it works

Question in.
Working out.

Three steps from the assignment sheet to a solution you can follow and check against your notes.

  1. 01

    Put in the question

    Type it in or upload a photo of the assignment sheet. You don't need to rewrite it.

  2. 02

    We read it back to you

    You see a sketch of the beam, truss or section we understood, with any assumptions. If we got something wrong, correct the question and solve again, or enter the beam yourself.

  3. 03

    Answers first, then the working

    The final answers come first. Press Show working to see every step on squared paper: what is done, why, and where each value comes from.

02 / What it coversMechanics first, then design

The first-year
essentials.

Mechanics opens first, because most early assignments are statics. Design to Eurocode and BS follows, since many universities still teach and examine BS 8110.

01Open now

Beams.

Mechanics

Statically determinate beams, from the reactions to the deflection.

  • Support reactions
  • Shear force and bending moment diagrams
  • Deflection
02Open now

Sections.

Mechanics

Composite shapes, set out as the usual A, ȳ, Aȳ table.

  • Centroid
  • Second moment of area
  • Section modulus
03Open now

Trusses.

Mechanics

Member forces, with tension and compression marked.

  • Method of joints
  • Method of sections
  • Zero-force members
04Open now

Concrete.

EC2 · BS 8110

Reinforced concrete beam design from a short brief, with a bar bending schedule. Slabs and columns next.

  • Beam bending and links
  • Deflection check
  • Bar bending schedule
05Open now

Bridges.

EN 1991-2 · BS 5400

Highway bridge deck design from a short brief: loads, grillage, beams, slab and bar schedule.

  • Deck and traffic loading (LM1 or HA/HB)
  • Influence lines and moving loads
  • Deck reinforcement and schedule
06Coming next

Steel.

EC3

Member checks for beams and columns.

  • Section class
  • Bending and shear
  • Buckling resistance
07Coming next

Foundations.

EC2 · BS 8110

Pad footings, from sizing to the shear checks.

  • Bearing pressure
  • Bending
  • Punching shear

How every number is found

The AI reads.
The engine calculates.

AI is only used to understand what your question asks. Every number in the answer comes from the same tested calculation engine our engineers use on real projects, and each step names its clause, table or formula so you can check it against your notes.

Back to the design engine